Brother International CP-7500 Users Manual - English - Page 80
Maintenance
View all Brother International CP-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
APPENDIX MAINTENANCE Simple sewing machine maintenance operations are described below. Cleaning the machine surface Slide the needle plate cover release toward d you to remove the needle plate cover. If the surface of the machine is dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly, and then wipe the surface of the machine. After cleaning it once with a wet cloth, wipe it again with a dry cloth. CAUTION ● Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. a Needle plate cover b Needle plate cover release Remove the bobbin case. e Grasp the bobbin case, and then pull it out. Cleaning the bobbin case Sewing performance will suffer if dust collects in the bobbin case; therefore, it should be cleaned periodically. Switch the machine off and unplug it. a CAUTION ● Make sure you unplug the machine before you clean it. Otherwise, you may get an electric shock or be injured. Raise the needle and the presser foot. b Loosen the presser-foot screw and the needle c clamp screw to remove the presser-foot holder and the needle. a Bobbin case Use the cleaning brush or a vacuum cleaner to f remove any dust from the race and its surrounding area. a Cleaning brush b Race • Do not put oil on the bobbin case. 78