Brother International CP-7500 Users Manual - English - Page 66
Free-motion quilting
View all Brother International CP-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
UTILITY STITCHES ■ Using the optional quilting guide Use the quilting guide to sew parallel stitches that are equally spaced. Free-motion quilting With free-motion quilting, the feed dogs can be lowered (using the feed dog position lever) so that the fabric can be moved freely in any direction. The optional quilting foot is needed for free-motion quilting. Insert the stem of the quilter into the hole at a the rear of the walking foot or presser foot holder. Walking foot Presser foot holder Remove the presser foot and the presser foot a holder. • For details, refer to "Removing the presser foot holder" (page 34). Align the quilting foot with the lower-left side b of the presser bar. The pin on the quilting foot should be positioned over the needle clamp screw. Adjust the stem of the quilter so that the quilt b guide aligns with the seam that has already been sewn. a Pin on quilting foot b Presser foot holder screw c Needle clamp screw Hold the quilting foot in place with your right c hand, and then tighten the presser foot holder screw using the disc-shaped screwdriver in your left hand. a Presser foot holder screw CAUTION ● Be sure to securely tighten the screws with the disc-shaped screwdriver, otherwise the needle may touch the presser foot, causing it to bend or break. 64