Brother International CV3550 Operation Manual - Page 17
Acaution
View all Brother International CV3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English Chapter 3 THREADING (Cover stitch model) CAUTION 1. Open the front cover by sliding it to the right and guiding the top toward you. Before threading, turn off the machine for safety. 2. Pull the thread off the spool and directly up through thread holder 1 and thread holder 2 on the thread tree, from back to front. Threading the looper 3. Pass the looper thread 3 as shown in the illustration. Run the thread in the sequence illustrated, following the blue line and the numbers next to each threading point. 2 4. Pass the thread through the tension disc 4 in the channel next to the tension dial marked with a blue . 5. Guide the thread down the channel and through threading points 5-9, following the numerical order in the illustration. 6. After running the thread to 9, push the looper 1 release lever 0 to move the looper to the right A, and then run the thread through B-C. 7. Pull about 10 cm (4 inch) of thread through the eye of the looper. 8. While pushing the looper D, return the looper 3 to its original position. 3 4 9. Close the front cover. NOTE: When using thick thread, such as decorative thread, as the looper thread, run the thread as shown in the illustration. A 3 4 Do not run the thread through A. C A B D : 9 6 5 7 8 15