Brother International DCP-8060 Quick Setup Guide - English - Page 21

Setting Up the machine Installing the Drivers & Software Windows® Network ■ After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results window will be shown. If the Installation Diagnostics shows a failure, please follow the on-screen instruction or read on-line help and FAQs in Start/All Programs (Programs)/Brother/ MFL-Pro Suite DCP-XXXX (where XXXX is your model name). ■ Once you are sure that you can print after the installation, restart your Firewall software. ■ Firewall settings on your PC may reject the necessary network connection for Network Scanning. Follow the instructions below to configure your Windows Firewall. If you are using a personal Firewall software, see the User's Guide for your software or contact the software manufacturer. ■ Windows® XP SP2 users: 1 Click the Start button, Control Panel and then Windows Firewall. Make sure that Windows Firewall on the General tab is set to On. 2 Click the Advanced tab and Settings... button. 3 Click the Add button. 4 To add port 54925 for network scanning, enter the information below: 1) In Description of service: - Enter any description, for example "Brother Scanner" (without the inverted commas). 2) In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your network: - Enter "Localhost" (without the inverted commas). 3) In External Port Number for this service: - Enter "54925" (without the inverted commas). 4) In Internal Port number for this service: - Enter "54925" (without the inverted commas). 5) Make sure UDP is selected. 6) Click OK. 1 2 5 3 4 5 If you still have trouble with your network connection, click the Add button. 6 To add port 137 for network scanning, enter the information below: 1) In Description of service: - Enter any description, for example "Brother Port" (without the inverted commas). 2) In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your network: - Enter "Localhost" (without the inverted commas). 3) In External Port Number for this service: - Enter "137" (without the inverted commas). 4) In Internal Port number for this service: - Enter "137" (without the inverted commas). 5) Make sure UDP is selected. 6) Click OK. 7 Make sure if the new settings are added and are checked, and then click OK. . ■ For network installations, the Repair MFL-Pro Suite selection from the main menu is not supported. ■ Network Scanning is not supported in Windows NT® 4.0. ■ For configuration of advanced network functions such as Scan to FTP, see the Software and Network User's Guides located on the CD-ROM. Networ k Administrators 19