Brother International DCP 8080DN Service Manual - Page 100
Error code 9F
UPC - 012502622697
View all Brother International DCP 8080DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
■ Error code 9F No Paper Reload paper, then press Start. Paper empty User Check • Replenish the paper in the paper tray. Step 1 2 3 4 5 6 Cause Dirt on PE sensor Harness connection failure of PE EG sensor PCB ASSY. PE actuator catching on some position PE sensor failure HVPS PCB unit failure Main PCB failure Remedy Clean the PE sensor. Check the harness connection of the PE EG sensor PCB ASSY and reconnect it. Correct catching of the PE actuator. Check the sensor performance following the procedure described in "Maintenance mode 32". If any problem occurs, replace the PE PG sensor PCB ASSY. Replace the HVPS PCB unit. Replace the main PCB ASSY. ■ Error code A1 Cover is Open Close the Front Cover. Front cover open User Check • Close the front cover perfectly. Step 1 2 3 4 5 Cause Remedy Front cover interlock switch failure Check the sensor performance following the procedure described in "Maintenance mode 32". If any problem occurs, replace the front cover interlock switch ASSY. Harness connection failure of front Check the harness connection of the front cover interlock switch ASSY cover interlock switch ASSY and reconnect it. Part pressing the front cover interlock switch is broken, which is provided at the left side of the front cover inside. Replace the front door main or front door unit ASSY. Relay front PCB failure Replace the relay front PCB ASSY. Main PCB failure Replace the main PCB ASSY. 3-28 Confidential