Brother International DCP 8080DN Service Manual - Page 147
Paper jam in the ADF, Paper jam in the paper eject
UPC - 012502622697
View all Brother International DCP 8080DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
■ Paper jam in the ADF - Check whether length does not use paper equal to or less than 148 mm. Step 1 2 3 4 5 6 Cause Check Result Remedy Foreign object inside ADF Is there a foreign object inside ADF? Yes Remove the foreign object. Document rear Does the document rear Re-assembly the actuator catching actuator move smoothly? No document rear actuator. on some position Flap A catching on Does the flap A move some position smoothly? No Re-assembly the flap A. LF4 film catching Does the LF4 film move on some position smoothly? No Replace the LF4 film. Document rear sensor malfunction Does the document rear sensor move smoothly? (Check it following the procedure described in "Maintenance mode 32") Replace the document rear sensor. No Feed roller failure Does the feed roller move smoothly? Is it damaged? No Replace the feed roller. ■ Paper jam in the paper eject section Step 1 2 3 Cause Check Result Remedy Foreign object Is there a foreign object around paper eject around paper eject? Yes Remove the foreign object. Pinch roller malfunction Is the pinch roller of the Re-assembly the pinch eject roller attached to the No roller. eject roller? Eject roller failure Does the eject roller move smoothly? Is it damaged? Replace the eject roller. No 3-75 Confidential