Brother International DCP-L5600DN Basic Users Guide - Page 62
Wrong Paper Size T2 - toner reset
View all Brother International DCP-L5600DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Error Message Cause Action Self-Diagnostic The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. Press and hold to turn off the machine, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on. Size Error The paper size defined in the printer driver is not supported by the defined tray. Choose a paper size supported by the defined tray. Size Error 2-sided The paper size specified Press in the machine's paper (if required). size setting is not Load the correct size of paper in the tray available for automatic 2- and set the tray for that paper size. sided printing. Choose a paper size supported by 2- The paper in the tray is sided printing. not the correct size and is not available for automatic 2-sided printing. Paper sizes available for automatic 2sided printing are Letter, Legal, Mexico Legal, India Legal and Folio. Size mismatch The paper in the tray is not the correct size. Load the correct size of paper in the tray indicated on the LCD and set the size of paper for the tray. Supplies Drum End Soon The drum unit is near the Order a new drum unit before the LCD end of its life. displays Replace Drum. Supplies Prepare New Toner Cartridge. If the LCD displays this message, you can still print. The toner cartridge is near the end of its life. Order a new toner cartridge now so a replacement toner cartridge is available when the LCD displays Replace Toner. Supplies Replace Drum It is time to replace the drum unit. Replace the drum unit with a new one. The drum unit counter Reset the drum unit counter. was not reset when a new See the instructions included with the drum was installed. new drum unit. Wrong Paper Size MP Wrong Paper Size T1 Wrong Paper Size T2 Wrong Paper Size T3 The specified tray ran out of paper during copying and the machine could not feed the same size paper from the next priority tray. Refill the paper in the paper tray. A Troubleshooting 49