Brother International DSmobile 700D Duplex Scanner Users Manual - English - Page 36

Mac OS® X Operation INSTALLING SOFTWARE Insert the Installation DVD that came with your DSmobile 700D scanner into your Mac® computer and follow the steps below. a Make sure your Macintosh® system software is Mac OS® X v10.4, v10.5, v10.6 or v10.7 and that your 2 application software works native and not in emulation of lower system software versions. b Do not connect the DSmobile 700D scanner to your Macintosh® until after the driver installation. c We recommend that the first installation and calibration should be done using an Administrator account. (See SETTING ADMINISTRATOR PRIVILEGES) d Click on the DVD icon, and then open "Macintosh" folder. e Double click on DSmobile 700D Driver.pkg. f Click on "Continue". g Select the disk for the installation or click "Continue". h Click "Install". i Close other application software and then click "Continue Installation". j When the installation is complete, click "Logout". k Connect your DSmobile 700D scanner to a Macintosh® USB port. l Start your TWAIN-compliant application software. The Macintosh® is supplied with "Image Capture" software but you may use other TWAIN-compliant software. Refer to Calibrating your DSmobile 700D Scanner using "Image Capture" uu page 22 for instructions on calibrating with "Image Capture". (For Mac OS® X v10.6 and v10.7, Refer to Performing Scanner Calibration uu page 34 for instructions on calibrating with "PageManager® 9") m Select "DSmobile 700D" as scanning device. n Follow the on-screen instructions for calibration and scanning. o Note that when using the DSmobile 700D on a Macintosh®, the scan button on the top of the scanner does not start scanning software automatically (available for Windows® OS only). 18