Brother International HL 1040 Quick Setup Guide - English - Page 18
Action7-4: Prepare DOS for the Printer (Only for HL-1040/1050) - hp printer
UPC - 012502525219
View all Brother International HL 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Action 7-4: Prepare DOS for the Printer (Only for HL-1040/1050 Users) How to Use the Printer in Your DOS Application Software (without using the Windows system) Before working with application software that runs in DOS, if you do not already have a suitable driver installed, you will need to install a printer driver that matches one of the following supported emulations: HL-1040 : HP LaserJet IIP, EPSON FX-850, or IBM Proprinter XL printers HL-1050 : HP LaserJet 6P, EPSON FX-850, or IBM Proprinter XL printers The following table shows combinations of printer drivers and printer emulation mode. To get the most out of this printer, you should install an HP printer driver in your application software. Printer Model Printer driver supported in your application software HL-1040 HP LaserJet IIP™ HP LaserJet II™ HL-1050 HP LaserJet 6L/6P™ HP LaserJet 5L/5P™ HP LaserJet 4/4L/4P™ HP LaserJet III/IIIP™ HL-1040/1050 Epson® FX-850™ Epson FX-80™ HL-1040/1050 IBM® Proprinter® XL IBM Proprinter Emulation mode to be selected with the remote printer console program HP LaserJet IIP emulation mode Auto emulation selection HP LaserJet 6L/6P emulation mode Auto emulation selection Epson FX-850 emulation mode Auto emulation selection IBM Proprinter XL emulation mode Auto emulation selection NOTE The best or recommended printer driver is indicated in bold. Be sure to choose the correct printer driver in your application software. Failure to do so may cause poor or inconsistent results. Ensure that the printing resolution of the HL-1040 is set to 300 dpi in your DOS application software. - 16 -