Brother International HL 1040 Quick Setup Guide - English - Page 9
Action5-1: Connect Your Printer to Your Computers parallel interface, port of the computer.
UPC - 012502525219
View all Brother International HL 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Action 5-1: Connect Your Printer to Your Computers parallel interface You must connect the printer to your computer with a suitable interface cable. In most cases, a bi-directional IEEE 1284 compliant parallel cable is used for this connection. 1 Make sure that the printer power switch is off before connecting or disconnecting the interface cable. Also, make sure that the computer is turned off. 2 Connect the parallel interface cable to the parallel interface port of the printer. ( x ) Secure the connection with the wire clips. ( y ) Connect the interface cable to the printer port of the computer. NOTE The HL-1040/1050 printer can also operate with an RS-232C/RS-422A serial interface by installing the optional serial interface board. In some countries it might be pre-installed. For more information, see "CHAPTER 4 OPTIONS" in the On-line User's Guide. For the location of your computers parallel (or serial, if you are using the optional interface board) printer port, refer to the User's Guide of your computer. - 7 -