Brother International HL-1050 Users Manual - English - Page 39
Maintenance, Replacing The Toner Cartridge - replacement
View all Brother International HL-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
CHAPTER 5 MAINTENANCE CHAPTER 5 MAINTENANCE REPLACING THE TONER CARTRIDGE The printer can print approximately 2,400 pages (5% coverage: A4/Letter) with one toner cartridge. When the toner cartridge is running low, the Alarm and Data (Toner) lamps blink once every 5 seconds to indicate toner low. Initially, some models are supplied with a starter toner cartridge which must be replaced after 1,000 pages. Note Actual page count will vary depending on your average document type. (i.e.: standard letter, detailed graphics, etc.) It is recommended that you always keep a new toner cartridge ready for use for when you get the toner low warning. Discard the used toner cartridge according to local regulations. If you are not sure of them, consult your local dealer. Be sure to seal up the toner cartridge tightly so that toner powder does not spill out of the cartridge. Do not discard used toner cartridges together with domestic rubbish. It is recommended that you clean the printer when you replace the toner cartridge. See "CLEANING THE PRINTER" in this chapter. Drum Alarm PaRpeeardy ToDnaetra Fig. 5-1 Toner Low and Empty Indication ! Caution You may print approximately 100 pages after the first toner low indication. Both Alarm and Data (Toner) lamps will blink continuously to indicate that the toner is empty. Once this indication appears, your printer cannot resume printing until you have installed a new toner cartridge. 5-1