Brother International HL-4000CN Users Manual - English - Page 36
Setting Protocols
View all Brother International HL-4000CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1.2.2 Setting Protocols Look When the printer is shipped from the factory, all protocols except FTP' are active by 2 default. Normally you do not need to perform the operations described in this section when you connect a new printer to a network for the first time. If you need to change any of the default Protocol settings, follow the steps outlined in this section. This concludes the printer settings. Move on to 1.2.3 "Confirming Settings". 3 Supported Protocols • For TCP/IP(LPD) → [LPD] protocol • For port 9100 → [Port9100] protocol • For IPP → [IPP] protocol • For NetBIOS (transport protocol: TCP/IP) → • For NetBIOS (transport protocol: NetBEUI) → • For NetWare → [NetWare] protocol • For AppleTalk → [AppleTalk] protocol [NetBIOS TCP/IP] protocol [NetBIOS NetBEUI] protocol See Refer to 5.2 "Basic Menu Operation" for information about the operation of the control panel. 1-9