Brother International HL-720 Users Manual - English - Page 58
Serial Interface Input
View all Brother International HL-720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
English: HL-YL User's Guide, Chapter 6 USER'S GUIDE For errors shown below, the printer indicates an operator call by blinking the Alarm lamp. If you use the printer with the supplied Windows driver, the status monitor will appear to indicate the error on your computer screen. (Both HL-720 and HL-730 series) The HL-730 series printer also prints some error messages on paper. Error Action Cover Open Close the top cover of the printer. Print Overrun • Press the panel switch to print the data remaining in the printer. • If you use the supplied Windows driver, try again after turning on Error Recovery in the PRINT menu of your application software, (Refer to Help section in Windows printer driver for the details.) or expand the printer memory with an optional memory board. • If this does not clear the error, reduce the complexity of your document or reduce the print resolution. Memory Full • Press the panel switch to print the data remaining in the (For HL-730 series Only) printer. • Reduce the print resolution or reduce the complexity of your This error can occur document. only when using DOS • Expand the printer memory with an optional memory board. or Macintosh. Parallel Interface Line • Press the panel switch to resume printing. Error • Check that the connection between your computer and printer is secure and correct, and check the interface cable. Serial Interface Framing Error • Press the panel switch to resume printing. • Check the communication parameters such as baud rate and (For HL-730 series stop bit on both your computer and printer. Only) Serial Interface Parity • Press the panel switch to resume printing. Error • Check the communication parameters such as bit length and (For HL-730 series parity on both your computer and printer. Only) Serial Interface Overrun Error • Press the panel switch to resume printing. • The interface hardware may be damaged. Consult your (For HL-730 series dealer. Only) Serial Interface Input • Press the panel switch to resume printing. Buffer Overflow • Check the communication parameters such as the handshake (For HL-730 series Only) protocols on both your computer and printer. • If the error occurs again, the interface hardware may be damaged. Consult your dealer. 6-2