Brother International HL-L3210CW Online Users Guide HTML - Page 83
HL-L3210CW/HL-L3230CDW, >> HL-L3270CDW
![]() |
View all Brother International HL-L3210CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
2 Routers or access points that support WPS are marked with this symbol: >> HL-L3210CW/HL-L3230CDW >> HL-L3270CDW HL-L3210CW/HL-L3230CDW 1. Press a or b to select the [Network] option, and then press OK. 2. Press a or b to select the [WLAN] option, and then press OK. 3. Press a or b to select the [WPS w/PIN Code] option, and then press OK. 4. When [WLAN Enable?] appears, select On. This will start the wireless setup wizard. 5. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router. 6. Using a computer connected to the network, in your browser's address bar, type the IP address of the device you are using as the Registrar. (For example: http://192.168.1.2) 7. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions. • The Registrar is usually the wireless LAN access point/router. • The settings page will differ depending on the brand of wireless LAN access point/router. For more information, see the instructions supplied with your wireless LAN access point/router. If you are using a Windows 7, Windows 8, or Windows 10 computer as a Registrar, complete the following steps: 8. Do one of the following: • Windows 7 Click (Start) > Devices and Printers > Add a device. 78
![](/manual_guide/products/brother-international-hll3210cw-online-users-guide-html-52c6833/83.png)