Brother International HL-L8260CDW Online Users Guide HTML - Page 263
Error Message, Cause, Action, Cancel, in Canada, No Paper Fed T3
View all Brother International HL-L8260CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
Error Message No Paper No Paper Fed T2 No Paper Fed T3 No Paper Fed T4 No Paper MP No Paper T1 No Paper T2 No Paper T3 No Paper T4 No Toner No Tray T1 No Tray T2 No Tray T3 No Tray T4 No Waste Toner Out of Memory Print Data Full Print Unable ## Cause Action The machine is out of paper, or • paper is not loaded correctly in the paper tray. • • Refill paper in the paper tray. Make sure the paper guides are set to the correct size. If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. Do not overfill the paper tray. The machine failed to feed paper Pull out the paper tray indicated on the LCD from the indicated paper tray. and remove all jammed paper. The MP tray is out of paper, or Do one of the following: paper is not loaded correctly in the • Refill paper in the MP tray. Make sure the MP tray. paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. The machine failed to feed paper from the indicated paper tray. Do one of the following: • Refill paper in the paper tray indicated on the LCD. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. • Do not overfill the paper tray. The toner cartridge for the color indicated on the LCD is not installed or not installed correctly. Remove the toner cartridge for the color indicated on the LCD from the drum unit, and put the toner cartridge back into the drum unit. If the problem continues, replace the toner cartridge. The paper tray is not installed or Reinstall the paper tray indicated on the LCD. not installed correctly. The waste toner box is not installed or not installed correctly. The machine's memory is full. The machine's memory is full. The machine has a mechanical problem. Reinstall the waste toner box. Press Cancel and reduce the print resolution. Press Cancel and delete the previously stored secure print data. • Press and hold to turn off the machine, wait a few minutes, and then turn it on again. • If the problem continues, contact Brother Customer Service. Contact Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) www.brother.ca/support (in Canada) or to locate a Brother Authorized Service Center, visit: www.brother-usa.com/service 258