Brother International HL-L8260CDW Online Users Guide HTML - Page 264
Error Message, Cause, Action, Cancel, Registration, Replace Belt, Replace Drum, Replace Toner
View all Brother International HL-L8260CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
Error Message Registration Replace Belt Replace Drum Replace Toner Replace WT Box Self-Diagnostic Short paper Size Error Size Error DX Size Mismatch Toner Error Cause Action Registration failed. • Press Go to retry the color registration. • If the error continues, press and hold down to turn off the machine. Wait a few seconds, and then turn on the machine again. Perform the color registration using the control panel. • Install a new belt unit. • If the problem continues, contact Brother Customer Service or your local Brother dealer. It is time to replace the belt unit. Replace the belt unit with a new one. It is time to replace the drum unit. Replace the drum unit with a new one. See Related Information: Replace the Drum Unit. The drum unit counter was not reset when a new drum was installed. Reset the drum unit counter. See the instructions included with the new drum unit. The toner cartridge is at the end of Replace the toner cartridge for the color its life. The machine stops all print indicated on the LCD. operations. It is time to replace the waste toner box. Replace the waste toner box with a new one. The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. Press and hold to turn off the machine, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on. The length of the paper in the tray is too short for the machine to deliver it to the Face down output tray. Open the back cover (Face up output tray) to let the printed page exit onto the Face up output tray. Remove the printed pages, and then press Go. The paper size defined in the printer driver is not supported by the defined tray. Choose a paper size supported by the defined tray. The paper size specified in the Press Cancel (if required). machine's paper size setting is not Load the correct size of paper in the tray and available for automatic 2-sided set the tray for that paper size. printing. Choose a paper size supported by 2-sided The paper in the tray is not the printing. correct size and is not available for automatic 2-sided printing. Paper sizes available for automatic 2-sided printing are Letter, Legal, Mexico Legal and Folio. The paper in the tray is not the correct size. Load the correct size of paper in the tray indicated on the LCD and set the size of paper for the tray. Press Go. One or more toner cartridges are not installed or not installed correctly. Pull out the drum unit. Remove all the toner cartridges, and then put them back into the drum unit. 259