Brother International HL1060 Service Manual - Page 193
Troubleshooting
View all Brother International HL1060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
CHAPTER 6 TROUBLESHOOTING CHAPTER 6 TROUBLESHOOTING ALARM INDICATIONS AT A GLANCE Operator Calls If a recoverable error occurs, the printer indicates an 'operator call' by blinking the Alarm lamp and any of the following lamps. Find the error and take the proper action to correct it. The printer automatically recovers from most errors, but you may need to reset the printer with the panel switch as described below. Blinking Lamp Paper ❍↔q Alarm❍↔q Toner ❍↔q Alarm❍↔q (every 5 seconds) Toner ❍↔q Alarm❍↔q (Fast blinking) Error Paper jam Paper empty Misfeed Toner low Action Clear the paper jam referring to the next section "PAPER JAMS" and press the panel switch if the printer does not automatically resume printing. Load paper in the printer referring to Chapter 2 and press the panel switch. Reinstall the paper and press the panel switch. Indicates that the printer has approximately 100 pages of printing left before the toner cartridge is empty. Prepare a new toner cartridge. Toner Empty Replace the toner cartridge with a new one referring to Chapter 5. CHAPTER 6 -1