Brother International Innov-is 6700D KIT 2 USER - English - Page 9

Saving and Recalling the Custom Thread Table using USB media c Press . You can save a custom thread table data file to USB media, and then you can recall the saved data from USB media again. Refer to "Creating a Custom Thread Table" in the Operation Manual of the machine, for the detailed instructions about a custom thread table. Note • Custom thread table data can only be saved to USB media. You cannot save the data in the machine's memory or in the computer. • Custom thread table data is saved as ".pcp" data file. ■ Saving the custom thread table in USB media a Insert the USB media into the primary (top) USB port on the right side of the machine. a Primary (top) USB port for media b USB media Note • Two USB media cannot be used with this machine at the same time. If two USB media are inserted, only the USB media inserted first is detected. b Press and then press . → The "Saving" screen is displayed. When the data is saved, the display returns to the original screen automatically. Note • Do not insert or remove USB media while "Saving" screen is displayed. You will lose some or all of the data you are saving. ■ Recalling the custom thread table in USB media a Insert the USB media containing the custom thread table data into the primary (top) USB port. Note • You can only recall one custom thread table data at a time. Do not store two or more ".pcp" data file in USB media. b Press and then press . c Press . → The "Saving" screen is displayed. When the data is loaded to the machine, the display returns to the original screen automatically. Note • Do not insert or remove USB media while "Saving" screen is displayed. You will lose some or all of the data you are saving. • To delete all the specified colors from the custom thread palette, press . 8