Brother International Innov-is 950D Operation Manual - Page 179
Be sure that the bobbin case is correctly
View all Brother International Innov-is 950D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Grasp both sides of the needle plate cover, and e then slide it toward you. a b a a Needle plate cover X The needle plate cover is removed. Remove the bobbin case. f Grasp the bobbin case, and then pull it out. • Align the U and { marks. c a a Bobbin case a U mark b { mark c Bobbin case • Make sure that the indicated points are aligned before installing the bobbin case. Use the cleaning brush or a vacuum cleaner to g remove any lint and dust from the race and bobbin thread sensor and their surrounding Insert the tabs on the needle plate cover into i the needle plate, and then slide the cover back area. on. 5 c a Cleaning brush b Race c Bobbin thread sensor a b Note z Do not apply oil to the bobbin case. z If lint or dust collects on the bobbin thread sensor, the sensor may not operate correctly. Insert the bobbin case so that the U mark on h the bobbin case aligns with the { mark on the race. a b a a Needle plate cover CAUTION ● Never use a bobbin case that is scratched. Otherwise, the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new bobbin case (part code: XE7560-001 (green marking)), contact your nearest authorized service center. ● Be sure that the bobbin case is correctly installed, otherwise the needle may break. Care and Maintenance 177