Brother International Innov-is 950D Operation Manual - Page 198
in embroidery mode, but the embroidery unit is not attached.
View all Brother International Innov-is 950D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
APPENDIX No Error Message Probable Cause 29 You tried to set a number of characters that will not fit within the frame. The upper thread has become tangled around the bobbin case, and the 30 needle is bent and hitting the needle plate, etc., so the sewing machine stops (refer to page 188). 31 You tried to use a function that cannot be used when the embroidery unit is attached. An Embroidery Memory Card that may not compatible with your machine has been inserted. • Certain licensed designs cannot be read by this machine. 32 • Designs in an unacceptable card format cannot be read by this machine. • Design data saved in a hoop size not compatible with your machine has been selected. 33 The utility stitch key or the reverse/reinforcement stitch button was pressed while the embroidery unit is attached. 34 You try to retrieve a pattern downloaded as one for a different machine. The start/stop button, the embroidery key, or the memory key is pressed in embroidery mode, but the embroidery unit is not attached. 35 The embroidery key was pressed when the embroidery unit is not attached. 36 The bobbin winder is winding the bobbin. If error message "F01" through "F07" appears in the LCD while the 37 F01-F07 sewing machine is being used, the machine may be malfunctioning. Contact your nearest authorized service center. 196