Brother International Innov-is 950D Operation Manual - Page 49
reinstall the flat bed attachment to its original
![]() |
View all Brother International Innov-is 950D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Raise up the two legs on the reverse side of the b extension table until they click. Turn back the extension table, and then store e the two legs in their original positions. 1 Attach the extension table to the sewing c machine arm. Keep the extension table horizontal and push it in slowly until it stops. Memo ● When you do not use the extension table, use it as the cover of the embroidery unit. Memo ● If the extension table is not stable or its height is improper, adjust its height by turning the rubber ends of legs. When you have finished sewing, remove the d extension table by pulling it to the left. Then reinstall the flat bed attachment to its original position. Sewing Cylindrical Pieces and Large Pieces 47
![](/manual_guide/products/brother-international-innovis-950d-operation-manual-7211f7a/49.png)
Sewing Cylindrical Pieces and Large Pieces
47
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
b
Raise up the two legs on the reverse side of the
extension table until they click.
c
Attach the extension table to the sewing
machine arm.
Keep the
extension table horizontal and push it
in slowly until it stops.
Memo
●
If the extension table is not stable or its
height is improper, adjust its height by
turning the rubber ends of legs.
d
When you have finished sewing, remove the
extension table by pulling it to the left. Then
reinstall the flat bed attachment to its original
position.
e
Turn back the extension table, and then store
the two legs in their original positions.
Memo
●
When you do not use the extension table,
use it as the cover of the embroidery unit.