Brother International Innov-is BP2150L Operation Manual - Page 35
Pass the end of the thread through the guide
View all Brother International Innov-is BP2150L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
LOWER THREADING f Pass the thread around the pre-tension disk making sure that the thread is under the pre-tension disk. h Pass the end of the thread through the guide slit in the bobbin winder seat, and pull the thread to the right to cut the thread with the cutter. B 1 Getting Ready a Pre-tension disk Make sure that the thread passes under the pre-tension disk. b Pre-tension disk c Pull it in as far as possible. Check to make sure thread is securely set between pre-tension disks. g Wind the thread clockwise bobbin 5-6 Times. around the a Guide slit (with built-in cutter) b Bobbin winder seat CAUTION • Be sure to follow the process described. If the thread is not cut with the cutter, and the bobbin is wound, when the thread runs low it may tangle around the bobbin and cause the needle to break. i Set the bobbin winding switch until it clicks into place. to the left, a Bobbin winding switch Memo • Sliding the bobbin winding switch to the left switches the machine into bobbin winding mode. The bobbin winding window appears. Basic operations B-33