Brother International Innov-is BQ2450 Operation Manual - Page 68
Stitch Settings
View all Brother International Innov-is BQ2450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
STITCH SETTINGS STITCH SETTINGS When you select a stitch, your machine automatically selects the appropriate stitch width, stitch length, "L/R SHIFT", and upper thread tension. However, if needed, you can change any of the individual settings. Note • Settings for some stitches cannot be changed (refer to the "STITCH SETTING CHART" on page S-67). • If you turn off the machine or select another stitch without saving stitch setting changes ("Saving Your Stitch Settings" on page S-22), the stitch settings will return to their default settings. Setting the Stitch Width Press to widen the zigzag stitch pattern width. Follow the steps below when you want to change the zigzag stitch pattern width. Memo • For an alternate method of changing the stitch width using the speed controller, see page S-39. Example: Press to narrow the zigzag stitch pattern width. The value in the display gets bigger. Memo • Press after pressing original setting. to return to the Note • After adjusting the stitch width, slowly rotate the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. The value in the display gets smaller. Setting the Stitch Length Follow the steps below when you want to change the stitch pattern length. S-10