Brother International Innov-is BQ2450 Operation Manual - Page 70
Setting the Thread Tension
![]() |
View all Brother International Innov-is BQ2450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
STITCH SETTINGS Setting the Thread Tension You may need to change the thread tension, depending on the fabric and thread being used. Follow the steps below to make any necessary changes. ■ Upper Thread is Too Tight If the bobbin thread is visible on the right side of the fabric, the upper thread is too tight. Note • If the bobbin thread was incorrectly threaded, the upper thread may appear to be too tight. In this case, refer to "Setting the Bobbin" of "Basic operations" and rethread the bobbin thread. ■ Proper Thread Tension The upper thread and the bobbin thread should cross near the center of the fabric. Only the upper thread should be visible from the right side of the fabric, and only the bobbin thread should be visible from the wrong side of the fabric. a Bobbin thread b Upper thread c Surface d Locks appear on surface of fabric Press , to loosen the upper thread. a Wrong side b Surface c Upper thread d Bobbin thread S-12
![](/manual_guide/products/brother-international-innovis-bq2450-operation-manual-aacff6c/70.png)