Brother International IntelliFax-2580C Cordless Handset Users Manual - English - Page 14

Setting your country, Registering additional, cordless handsets - machine

Page 14 highlights

Chapter 1 b Place the battery in the correct position as shown below. c Slide the battery cover back on. Note • Be careful that you do not catch the battery connector cord. • After replacement, you should set the date and time. (See Date and Time on page 20.) d Charge the battery for 12 hours. (See Charging the battery on page 24.) You can continue to set up the handset during this time. Setting your country 1 The first time you install the battery, you must set your country so that the cordless handset works correctly on local telecommunication lines. a Press Menu/OK. b Press a or b to choose your country. Press Menu/OK. c Press 1 to confirm. Registering additional cordless handsets 1 You can register 3 additional cordless handsets for a total of 4 cordless handsets to the machine (base unit). The cordless handset that was included with your machine is already registered with the machine (base unit). Note Do not operate any other cordless handsets until registration of the cordless handset you are registering has completed. For non-Color LCD models (base unit) 1 a Press Menu/OK on the cordless handset. Note If you see Enter Register HS Mode on Base Unit on the LCD of the cordless handset, go to step c. b Press a or b to choose Register HS. Press Menu/OK. c Press Menu, 0, 6 on the control panel of the machine (base unit). d Press OK on the control panel of the machine (base unit). You will hear one long beep when the cordless handset is registered correctly. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

Chapter 1
3
b
Place the battery in the correct position
as shown below.
c
Slide the battery cover back on.
Note
Be careful that you do not catch the
battery connector cord.
After replacement, you should set the date
and time.
(See
Date and Time
on page 20.)
d
Charge the battery for 12 hours. (See
Charging the battery
on page 24.)
You can continue to set up the handset
during this time.
Setting your country
1
The first time you install the battery, you must
set your country so that the cordless handset
works correctly on local telecommunication
lines.
a
Press
Menu/OK
.
b
Press
a
or
b
to choose your country.
Press
Menu/OK
.
c
Press
1
to confirm.
Registering additional
cordless handsets
1
You can register 3 additional cordless
handsets for a total of 4 cordless handsets to
the machine (base unit). The cordless handset
that was included with your machine is already
registered with the machine (base unit).
Note
Do not operate any other cordless
handsets until registration of the cordless
handset you are registering has
completed.
For non-Color LCD models (base unit)
1
a
Press
Menu/OK
on the cordless
handset.
Note
If you see
Enter Register HS Mode
on Base Unit
on the LCD of the
cordless handset, go to step
c
.
b
Press
a
or
b
to choose
Register HS
.
Press
Menu/OK
.
c
Press
Menu
,
0
,
6
on the control panel of
the machine (base unit).
d
Press
OK
on the control panel of the
machine (base unit).
You will hear one long beep when the
cordless handset is registered correctly.