Brother International IntelliFax-2580C Cordless Handset Users Manual - English - Page 15

General Information Note • If you hear three short beeps, the cordless handset did not register. Repeat steps b and d. • If you want to install another cordless handset, repeat steps a through d. e Press Stop/Exit on the control panel of the machine (base unit). For Color LCD models (base unit) 1 a Press Menu/OK on the cordless handset. Note If you see Enter Register HS Mode on Base Unit on the LCD of the cordless handset, go to step c. b Press a or b to choose Register HS. Press Menu/OK. c Press Menu on the control panel of the machine (base unit). d Press a or b to choose Initial Setup. Press OK. e Press a or b to choose Register Handset. Press OK. f Press a or b to choose Register. Press OK. You will hear one long beep when the cordless handset is registered correctly. Note • If you hear three short beeps, the cordless handset did not register. Repeat step b and f. • If you want to install another cordless handset, repeat steps a through f. g Press Stop/Exit on the control panel of the machine (base unit). Deregistering cordless handsets 1 If you want to register a handset that has already been registered, with another machine (base unit), you should deregister it first, and then register it with the other machine (base unit). (See Registering additional cordless handsets on page 3.) If you are using more than one cordless handset, deregistration will remove all handsets registered with the machine (base unit). Note Do not operate any other cordless handsets until deregistration of the cordless handset you are removing has completed. For non-Color LCD models (base unit) 1 a Press Menu, 0, 6 on the control panel of the machine (base unit). b Press Erase. Then, confirm the Delete by pressing 1. c Press Stop/Exit. For Color LCD models (base unit) 1 a Press Menu on the control panel of the machine (base unit). b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Register Handset. Press OK. d Press a or b to choose Terminate. Press OK. Then, confirm the Delete by pressing 1. e Press Stop/Exit. 4