Brother International LS-2000 Users Manual - English and Spanish - Page 7

Needle and presser foot section Flat bed attachment The accessories are stored in a compartment inside the flat bed attachment. Lift the bottom of the flat bed attachment 1 a toward you, and then pull the flat bed attachment out to remove it. a Presser foot holder assembly The presser foot is installed onto the presser foot holder assembly. b Presser foot screw Use the presser foot screw to hold the presser foot holder assembly in place. c Presser foot (Zigzag) The presser foot applies pressure consistently on the fabric as the sewing takes place. Attach the appropriate presser foot for the selected stitching. d Feed dogs The feed dogs feed the fabric in the sewing direction. e Needle plate The needle plate is marked with guides for sewing straight seams. f Shuttle hook g Shuttle cover Open the shuttle cover to set the bobbin. h Bobbin case i Needle j Needle bar thread guide k Needle clamp screw Use the needle clamp screw to hold the needle in place. a Flat bed attachment b Storage compartment Note ● Put the accessories in the bag, and then store the bag inside the compartment. If the accessories are not in a bag, they may fall out, and be lost or damaged. 6