Brother International MFC 3100C Quick Setup Guide - English - Page 6

For Windows NT® Workstation Version 4.0 Users MAKE SURE THAT YOU FOLLOWED THE SET-UP INSTRUCTIONS ON PAGE 1 TO 3 BEFORE CONTINUING Step 1. Check that your computer is turned on. You must be logged on as the Administrator. Step 2. Connect the MFC to your PC with the Parallel Cable. A. Connect the Filter Core and Cable Tie to the parallel interface cable. B. Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips. C. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your computer's parallel printer port, see the User's Guide for your computer. Step 3. Turn on the MFC by plugging in the power cord. Step 4. Insert the CD-ROM into the CDROM drive. Then, follow the instructions on the screen. (Same step as for Windows® 95/98/98SE/Me/2000 Users Step 3. , 1 to 9) 10. Select Yes to restart your computer, and then click Finish. 11. Click Yes to have the Control Center loaded each time Windows is started. The Control Center will appear as an icon in the task bar. If you click No, the Scan to key on the MFC will be disabled.*3 The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. For Apple® Macintosh® QuickDraw® Driver for OS 8.6/9.0/9.0.4/9.1 Users MAKE SURE THAT YOU FOLLOWED THE SET-UP INSTRUCTIONS ON PAGE 1 TO 3 BEFORE CONTINUING Step 1. Make sure your MFC power cord is unplugged and your Macintosh is turned on. Make sure you do NOT connect your MFC to your Macintosh Step 2. Insert the CD-ROM into your CD-ROM drive. Installing MFL Pro Driver 1. When the window appears, double-click MFL PRO Suite Driver Installer to install the printer and scanner drivers. After the installation is completed, the screen prompts you to restart your Macintosh. Step 3. Step 4. Restart your Macintosh so it can recognize the new driver. Connect the Filter Core and Cable Tie to the USB cable. Step 5. Step 6. Step 7. Connect the MFC to your Macintosh with the USB cable, and then turn on the MFC by plugging in the power cord. Select the Printer. 1. From the Apple menu, open the Chooser. 2. Click to MFL Pro Color icon you installed. On the right side of the Chooser, select the printer to which you want to print. Close the Chooser. Install Paper Port. 1. Double-click the PaperPort®5.5 Installer. *1 2. Follow the instructions on the screen. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. You can get a variety of information from this CD-ROM (For Windows®) What is included on the CD-ROM Windows Macintosh Install Software You can install printer and scanner drivers and the various utility items. On-Line Registration You will be pointed to a directory on the Brother Product Registration Web page. On-Line Documentation View the Owner's Manual and other documentation. Brother Support Get all contact you need if you have to get in touch with our Customer Service, or Brother Authorized Service Center. Help Helpful hints. You can get a variety of information from this CD-ROM (For Macintosh®) MFL Pro Suite Driver Installer You can install the PC Fax Send, printer and scanner drivers and the various utility items. PaperPort 5.5 Installer You can install a document management application used to view scanned documents. ReadMe! You can get important information and troubleshooting tips. Documents View the Owner's Manual and other documentations. Page 6