Brother International MFC-4800 Users Manual - English - Page 119
Windows, Setup Printing Difficulties, Fax Start - windows 7 driver
View all Brother International MFC-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
DIFFICULTY SUGGESTIONS Windows® Setup Printing Difficulties I cannot print from my application software. Make sure the Windows® printer driver is installed and that you selected it in your application software. Sometimes I get the error message OUT OF MEMORY when printing certain documents from Windows®. If you are using the supplied Windows® driver, turn the error recover operation on in the Setup dialog box and try again. Reduce the print resolution or reduce the complexity of your document and try again. The MFC does not load paper. The LCD shows CHECK PAPER or PAPER JAM. Check to see if the CHECK PAPER or PAPER JAM message appears on the LCD. If so, the multipurpose sheet feeder may be out of paper or not properly installed. If it is empty, load a new stack of paper into the feeder and then press Fax Start. If there is paper in the multi-purpose sheet feeder, make sure it is straight. If the paper is curled, you should straighten it. Sometimes it is helpful to remove the paper, turn the stack over and place it back into the multi-purpose sheet feeder. Reduce the amount of paper in the multi-purpose sheet feeder, and then try again. How can I load envelopes? You can load envelopes from the multi-purpose sheet feeder. Your application software must be set up to print the envelope size you are using. This is usually done in the Page Setup or Document Setup menu of your software. Refer to your application manual. What paper can I use? You can use plain paper, envelopes, organizer paper, transparencies and labels for laser machines. For information on paper you can use, See Acceptable Paper on page 2-7. How can I clear paper See Paper Jam on page 13-5 to 13-6. jams? T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 13 - 11