Brother International MFC-790CW Users Manual - English - Page 135
How to set a new default, How to reset to the factory settings, Understanding the Error Messages
UPC - 012502620501
View all Brother International MFC-790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive How to set a new default 13 You can set your own default setting. a Press (Scan). b Press Scan to Media. c Pressd or c to display Set New Default. d Press Set New Default. e Press Yes to confirm. f Press Stop/Exit. How to reset to the factory settings 13 You can restore all the settings you have changed to the factory settings. a Press (Scan). b Press Scan to Media. c Press d or c to choose Factory Reset. d Press Factory Reset. e Press Yes to confirm. f Press Stop/Exit. Understanding the Error Messages 13 Once you are familiar with the types of errors that can occur while you are using PhotoCapture Center®, you can easily identify and troubleshoot any problems. Hub is Unusable. This message will appear if a Hub or USB Flash memory drive with a Hub has been put into the USB direct interface. Media Error This message will appear if you put in a memory card that is either bad or not formatted, or when there is a problem with the media drive. To clear this error, take out the memory card. No File This message will appear if you try to access a memory card or USB Flash memory drive in the drive (slot) that does not contain a .JPG file. Out of Memory This message will appear if you are working with images that are too large for the machine's memory. This message will also appear when a memory card or USB Flash memory drive you are using does not have enough space available for the scanned document. Media is Full. This message will appear if you are trying 13 to save more than 999 files in a memory card or USB Flash memory drive. Unusable Device This message will appear if a USB device or USB Flash memory drive that is not supported has been connected to the USB direct interface. For more information, visit us at http://solutions.brother.com. This message will also appear if you connect a broken device to the USB direct interface. 119