Brother International MFC 885CW Quick Setup Guide - English - Page 51

Installing the Driver & Software Macintosh® Note • For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to Mac OS® X 10.2.4 or greater. (For the latest information for Mac OS® X, visit http://solutions.brother.com) • Make sure there are no memory cards or a USB Flash memory drive inserted into the media drives or USB direct interface at the front of the machine. 12 Turn on your Macintosh®. 13 Put the supplied CD-ROM into your CD-ROM drive. 17 The Brother software will search for the Brother device. During this time the following screen will appear. Note • If the machine is configured for your network, choose the machine from the list, and then click OK. This window will not appear if there is only one machine connected on the network, it will be chosen automatically. Go to step 18. Macintosh® Wireless Network 14 Double-click the Start Here OSX icon to install. • If this screen appears click OK. 15 Choose Wireless Network Connection, and then click Next. Enter a name for your Macintosh® in Display Name up to 15 characters long and click OK. Go to step 18. 16 Click on the Checked and confirmed check box, and then click Next. Follow the on-screen instructions. • If you want to use the machine's Scan key to scan over the network you must check the Register your computer with the "Scan To" functions on the machine box. • The name you enter will appear on the machine's LCD when you press the Scan key and choose a scan option. (For more information, see Network Scanning in the Software User's Guide on the CD-ROM.) Please wait, it will take a few seconds for the software to install. After the installation, click Restart to finish installing the software. 49