Brother International MFC 9180 Owners Manual - Page 31
Sending a Fax, Scanning Adjustment, Contrast, Fax Resolution
View all Brother International MFC 9180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
BASIC FAX USE 2 Sending a Fax Scanning Adjustment Contrast If your document is very light or very dark, you might want to set the contrast accordingly. Use LIGHT to send a light document. Use DARK to send a dark document. This setting is a temporary setting only. 1 Insert the document face up in the ADF, or face down on the glass platen. (See Setting the Document, page 1.) 2 Press Menu/Set, 2, 2, 1. 3 Use or to select AUTO, LIGHT, or DARK. 4 When the screen displays your selection, press Menu/Set. 5 Press 2 if you are finished choosing settings, and go to Step 6-OR-Press 1 if you want to select additional settings. The display returns to Setup Send menu. 6 Enter a fax number and press Fax Start. Fax Resolution When you have a document in the ADF, or on the glass platen, you can use the Fax Resolution key to temporarily change the setting. Press Fax Resolution repeatedly until the LCD shows the setting you want. -OR- You can change the default setting. 1 Press Menu/Set, 2, 2, 2. 2 Press or to select the resolution you want, and then press Menu/Set. 3 Press Stop/Exit. STANDARD: Suitable for most typed documents. FINE: Good for small print; transmits a little slower than Standard resolution. S.FINE: Good for small print or artwork; transmits slower than Fine resolution. PHOTO: Use when document has varying shades of grey; slow transmission time. Sending a Fax 23