Brother International MFC-J4410DW Wi-Fi Direct Guide - English - Page 13

Configuration methods Configuring your network using Wi-Fi Direct (For DCP-J4110DW, MFC-J4410DW/J4610DW) 2 The Wi-Fi Direct network settings are configured from the control panel of your Brother machine. 2 One-push configuration using Wi-Fi Direct 2 If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network. NOTE When the machine receives the Wi-Fi Direct request from your mobile device, the message Received Wi-Fi Direct connection request. will be displayed. Press Connect to connect. a Press Settings. b Press s or t to choose Network. c Press s or t to choose Wi-Fi Direct. d Press Push Button. e When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off. f Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed. Press OK on your Brother machine. This will start the Wi-Fi Direct setup. To cancel, press . g Do one of the following:  When your Brother machine is the G/O, connect your mobile device to the machine directly.  When your Brother machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Choose the mobile device to which you want to connect and press OK. Search for available devices again by pressing Rescan. h If your mobile device connects successfully, the machine displays the message Connected. You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/). If the connection fails, see Troubleshooting on page 14. One-push configuration using WPS (Wi-Fi Protected Setup) 2 If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi Direct network. 10