Brother International MFC-J4410DW Wi-Fi Direct Guide - English - Page 18
Error messages when configuring Wi-Fi Direct from the control panel menu continued - mfc j4510dw user manual
View all Brother International MFC-J4410DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Troubleshooting Error messages when configuring Wi-Fi Direct from the control panel menu (continued) Error Message Cause Action (For MFC-J2510/J4510DW) The Brother machine cannot find your Make sure your machine and mobile No Device mobile device. device are in the Wi-Fi Direct mode. (For DCP-J4110DW, MFC-J4410DW/J4610DW) No Device Move the mobile device closer to your Brother machine. 3 Move your Brother machine and the mobile device to an obstruction-free area. If you are manually configuring the Wi-Fi Direct network, make sure you have entered the correct password. If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. (For MFC-J2510/J4510DW) A device is already connected. Press [OK]. (For DCP-J4110DW, MFC-J4410DW/J4610DW) A device is already connected. Press [OK]. Another mobile device is already connected to the Wi-Fi Direct network where the Brother machine is the G/O. After the current connection between your Brother machine and another mobile device has shut down, try configure the Wi-Fi Direct settings again. Confirm the connection status by printing the Network Configuration Report (see Network User's Guide: Printing the Network Configuration Report). 15