Brother International MFC-J4410DW Wi-Fi Direct Guide - English - Page 20
Glossary
View all Brother International MFC-J4410DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4 Glossary 4 Wi-Fi Direct network terms 4 Group Owner (G/O) 4 If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi Direct network. The G/O assigns an SSID name, password and IP address for the Wi-Fi Direct network. The default setting is Off. 4 Device Information 4 Device Name 4 You can check the device name of the Brother machine in the Wi-Fi Direct network environment. The device name will be shown as MFC-xxxx or DCP-xxxx (where xxxx is your model name.). SSID 4 This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the SSID name. IP Address 4 This field displays the current IP address of the machine, as assigned by the G/O. Status Information 4 Status 4 This field displays the current Wi-Fi Direct network status. When your machine is a G/O, it displays the message G/O Active(**) (where ** is the number of devices). When your machine is a client, the machine displays the message Client Active. If you see Off, your machine's Wi-Fi Direct interface is disabled. Signal 4 This field displays the current Wi-Fi Direct network signal strength. Channel 4 This field displays the current Wi-Fi Direct network channel. Speed 4 This field displays the current Wi-Fi Direct network speed. I/F Enable 4 If you want to use the Wi-Fi Direct network connection, set I/F Enable to On. 17