Brother International MFC-J5330DW Online Users Guide HTML - Page 617
No File, No Paper Fed, No Paper Fed [Tray, No Paper Fed [MP, Tray], No Response/Busy, Out of Fax
![]() |
View all Brother International MFC-J5330DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 617 highlights
Error Message No File No Paper Fed No Paper Fed [Tray #1] No Paper Fed [MP Tray] No Paper Fed [Tray #2] No Response/Busy Out of Fax Memory Out of Memory Cause The USB flash drive in the media drive does not contain a .JPG file. The machine is out of paper or paper is not correctly loaded in the paper tray. The paper was not inserted in the center position of the MP tray. The Jam Clear Cover is not closed correctly. Paper dust has accumulated on the surface of the paper pick-up rollers. The number you dialed does not answer or is busy. The fax memory is full. The machine's memory is full. Action • Move your Brother machine and the mobile device to an obstruction-free area. • If you are manually configuring the WiFi Direct network, make sure you have entered the correct password. • If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. Put the correct USB flash drive into the slot again. Do one of the following: • Refill the paper tray, and then follow the LCD instructions. • Remove and reload the paper, and then follow the LCD instructions. See Related Information: Load Paper. Remove the paper and reinsert it in the center of the MP tray, and then follow the LCD instructions. See Related Information: Load Paper in the Multi-purpose Tray (MP Tray). Make sure the Jam Clear Cover is closed evenly at both ends. See Related Information: Printer Jam or Paper Jam. Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. Verify the number and try again. Do one of the following: • Clear the data from the memory. To gain extra memory, you can turn off Memory Receive. See Related Information: Turn Off Memory Receive. • Print the faxes that are in the memory. See Related Information: Print a Fax Stored in the Machine's Memory. If a fax-sending or copy operation is in progress: • Press or Quit or Close and wait until the other operations that are in progress finish, and then try again. • Press Send Now to send the pages scanned so far. • Press Partial Print to copy the pages scanned so far. • Clear the data in the memory. To gain extra memory, you can turn off Memory Receive. 610
![](/manual_guide/products/brother-international-mfcj5330dw-online-users-guide-html-8055752/617.png)