Brother International MFC-J5945DW Reference Guide - Page 24
Document Jam/too, DR Mode in Use, High Temperature, Hub is Unusable., Ink Absorber, NearFull, Ink Low
View all Brother International MFC-J5945DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Error Message Document Jam/too Long DR Mode in Use High Temperature Hub is Unusable. Ink Absorber NearFull Ink Absorber Pad Full Ink Low Install Ink Action The document was not inserted or fed correctly, or the document scanned from the ADF was too long. For more detailed information, see the Online User's Guide: Document Jams. The machine is in Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off. For more detailed information, see the Online User's Guide: Turn off Distinctive Ring. After cooling the room, allow the machine to cool down to room temperature. Try again when the machine has cooled down. Hubs, including a USB flash drive with a built-in hub, are not supported. Unplug the device from the USB direct interface. The ink absorber box must be replaced soon. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. • The ink absorber box absorbs the small amount of ink emitted during print head cleaning. The ink absorber box must be replaced. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. One or more of the ink cartridges are near the end of their lives. Order a new ink cartridge. You can continue printing until the touchscreen displays Replace Ink. For more detailed information, see the Online User's Guide: Replace the Ink Cartridges. • You can still scan even if the ink is low or needs to be replaced. Remove the new ink cartridge and re-install it slowly and firmly until it locks into place. For more detailed information, see the Online User's Guide: Replace the Ink Cartridges. 22