Brother International MP-21CDX Service Manual - Page 84
Refit the Retaining ring to the Main roller ASSY using a slotted screwdriver, while holding
View all Brother International MP-21CDX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
(3) Remove the Retaining ring from the Main roller ASSY using a slotted screwdriver. (4) Remove the Main roller gear 40 and Spring pin. (5) Remove the Paper eject idle gear 25 from the Chassis R. Spring pin 1x5 Chassis R Paper eject idle gear 25 Main roller gear 40 (Black) Retaining ring Fig. 3.45 Note: Refit the Retaining ring to the Main roller ASSY using a slotted screwdriver, while holding the shaft end of the Main roller ASSY. (6) Turn the Bearing L main clockwise until its catch fits in the detented portion of the Chassis L, then remove the Bearing L main. Chassis L Fig. 3.46 Bearing L main III-31
III-31
(3)
Remove the Retaining ring from the Main roller ASSY using a slotted screwdriver.
(4)
Remove the Main roller gear 40 and Spring pin.
(5)
Remove the Paper eject idle gear 25 from the Chassis R.
Fig. 3.45
<Reassembly>
Note:
Refit the Retaining ring to the Main roller ASSY using a slotted screwdriver,
while holding the shaft end of the Main roller ASSY.
(6)
Turn the Bearing L main clockwise until its catch fits in the detented portion of the
Chassis L, then remove the Bearing L main.
Fig. 3.46
Chassis L
Bearing L main
Chassis R
Spring pin 1x5
Retaining ring
Main roller gear 40 (Black)
Paper eject idle gear 25