Brother International PC 420 Users Manual - English - Page 44
Overcasting foot G, Zigzag foot J - buttonhole
UPC - 012502541004
View all Brother International PC 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
GETTING READY SEWING BASICS UTILITY STITCHES GETTING READY CONTENTS Press the black button at the back of the 4 presser foot holder. 1 2 1 Black button 2 Presser foot holder X The presser foot holder releases the presser foot. Place a different presser foot below the holder 5 so that the presser foot pin is aligned with the notch in the holder. Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read. 1 Note ● When a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Buttonhole foot "A" Overcasting foot "G" Zigzag foot "J" Button fitting foot "M" Monogramming foot "N" Blind stitch foot "R" Side cutter "S" ● For details on the presser foot that should be used with the selected stitch, refer to "Stitch Settings" (page 128). 2 3 1 Presser foot holder 2 Notch 3 Pin Slowly lower the presser foot lever so that the 6 presser foot pin snaps into the notch in the presser foot holder. APPENDIX INDEX 1 1 Presser foot lever X The presser foot is attached. Raise the presser foot lever to check that the 7 presser foot is securely attached. 38