Brother International PC 420 Users Manual - English - Page 78
Sewing overcasting stitches using the optional side cutter, Stitch Name, Application, Stitch Width
UPC - 012502541004
View all Brother International PC 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
GETTING READY SEWING BASICS UTILITY STITCHES UTILITY STITCHES CONTENTS Sewing overcasting stitches using the optional side cutter Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off. Five stitches can be used to sew overcasting stitches with the side cutter. Stitch Name Pattern Application Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot 63 Sewing straight stitches while 0.0 0.0-2.5 2.5 0.2-5.0 cutting the fabric (0) (0-3/32) (3/32) (1/64-3/16) 64 Sewing zigzag stitches while 3.5 3.5-5.0 1.4 0.0-4.0 cutting the fabric (1/8) (1/8-3/16) (1/16) (0-3/16) Overcasting 65 stitch Preventing fraying in thin and mediumweight fabrics while cutting the fabric 3.5 (1/8) 3.5-5.0 2.0 1.0-4.0 (1/8-3/16) (1/16) (1/16-3/16) S 66 Preventing fraying in thick 5.0 3.5-5.0 2.5 1.0-4.0 fabrics while cutting the fabric (3/16) (1/8-3/16) (3/32) (1/16-3/16) 67 Preventing fraying in thick 5.0 3.5-5.0 2.5 1.0-4.0 fabrics while cutting the fabric (3/16) (1/8-3/16) (3/32) (1/16-3/16) Hook the connecting fork of the side cutter 4 onto the needle clamp screw. 1 APPENDIX Remove the presser foot. 1 • For details, refer to "Replacing the presser foot" (page 37). Lower the presser foot lever, and then 2 manually thread the needle. • The needle threader cannot be used. If the needle threader is used with the side cutter, the sewing machine may be damaged. Raise the presser foot lever. 3 2 1 Connecting fork 2 Needle clamp screw Position the side cutter so that side cutter pin 5 is aligned with the notch in the presser foot holder, and then slowly lower the presser foot lever. 2 1 1 Notch in presser foot holder 2 Pin X The side cutter is attached. 72 INDEX