Brother International PC-8500D Users Manual - English - Page 34
Changing The Presser Foot
View all Brother International PC-8500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Setting Up Sewing Utility Stitches Characters and Decorative Stitches Embroidering Editing Embroidery Patterns CHANGING THE PRESSER FOOT Change the presser foot according to the LCD message 1. Push the "NEEDLE POSITION" button to raise the needle, 1 and then turn off the power. 2. Raise the presser foot lever. 2 3. Press the black button located at the back of the presser 1 foot holder to release the foot. 1 Presser foot holder 1 2 4. Place the presser foot pin directly below the holder-end and lower the presser foot lever. 1 Holder-end 2 Foot pin Installing embroidery foot "Q" 5 1. Push the "NEEDLE POSITION" button to raise the needle, and then turn off the power. 2. Raise the presser foot lever. 3. While pressing the black button to the left of the presser foot holder, pull the presser foot holder downward to remove it. Retrieving My Custom Stitch TM Error Maintenance Messages Trouble shooting Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) 31