Brother International PN-5700DS Owner's Manual - English - Page 15
Getting, Started
View all Brother International PN-5700DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GETTING STARTED Getting Started Precautions • Never power the machine with an AC adapter other than the AC adapter which comes with your machine. • in case of malfunction, overheating, or other problems, immediately turn the power off, disconnect the AC adapter and consult your dealer. Turn the power off and disconnect the AC adapter during thunderstorms. Do not attempt to disassemble the machine. It has no user-serviceable parts inside. • Do not tug on the power cord or connection cables. To disconnect, be sure to always grasp the plug itself. Avoid direct exposure to sunlight and other sources ofheat. Be especially carefulnot to leave the machine in an automobile exposed to direct sunlight. The display is vulnerable to high temperature. • Avoid spills. If any liquid enters the machine, immediately turn the power off, disconnect the AC adapter and consult your dealer. Do not allow foreign matter to enter the interior of the unit or get between the keys. Be especially careful of metal objects. • Use the unit on a horizontal, hard surface. Avoid locations subject to excessive vibration, moisture or dust. The display is especially vulnerable to humidity and can be easily damaged if it is hit or scratched with hard objects. Never apply undue pressure on the display. Clean with a soft, dry cloth. Avoid using chemicals, solvents and detergents. Do not use sprays in the vicinity of the machine. Aerosols are extremely harmful to the disk drive. • Avoid dropping the machine and do not place objects on the keyboard. • To avoid interference, do not place the machine too close to a radio receiver or television. If the machine is too close to a television set, the disk drive may not work properly. • if you switch the machine off, wait at least 10 seconds before switching it on again. Failure to respect this delay may disrupt the start-up sequence, resulting in faulty operation andpossible hardware damage. • Rechargeable Battery: Do not try to disassemble and do not dispose of the battery in a fire. The battery may burst. Avoid short circuits between the battery terminal and recharge at least once a year even if the battery is not used. For more details, see "Precautions Regarding the Rechargeable Battery" on page 7. • Display: The backlit panel will gradually decrease its brightness as it is used. To maximize the life of the display, turn the back light off when working in a well-lit location. Never increase the brightness more than necessary. After much use the panel may expire. When this occurs, contact your local Brother service location to have the panel replaced. WARNING: it is a good practice to save every text file to disk after a work session in the Create Document mode to provide a back up of your files in case anything should go wrong. Failure to save your files to disk before using the self demo, disk application function, or convert function of the File Management mode will cause you to lose your text files. Since these programs use the entire memory, all text files in internal memory must be saved to disk before the programs can be accessed. We are sure that if you forget once and lose your information, you willnever forget again. 1