Brother International PN-5700DS Owner's Manual - English - Page 35

GETTING STARTED Selecting the correct PRINTER mode MODE EMULATION PRINTER Brother 24 pin DOT IBM PROPRINTER XL24E XLI500 (M1324) (24 pin) M1824 Brother 9 pin DOT IBM PR0PRINTER XL (9 pin) M1209 XL500 (M1309) XL1000 (M1709L) XL2000 (M1724L) Brother HJ INKJET IBM PROPRINTER XL24E HJ100 Brother HL LASER HP LASERJET HP HL4 HL8 HP LASERJET II HP LASERJET IIP HP LASERJET III Brother HR DAISY WHEEL DIABLO630 HR40 DIABLO PRINTER Brother Typewriter TTY (without backspace) IF-20 +EM-1050, etc. Epson 24 pin DOT Epson LO Series LO510 LO850 KX-P1124 (Panasonic) Epson 9 pin DOT Epson FX Series FX850 LX810 KX-P1180 (Panasonic) IBM 24 pin DOT IBM PROPRINTER XL24E IBM PROPRINTER XL24E BJ-10e (Canon) IBM 9 pin DOT HP LASER IBM PROPRINTER XL HP LASERJET IIP IBM PROPRINTER XL HP LASERJET II HP LASERJET IIP HP LASERJET III other TTY (without backspace) (IF-20 + EM-1050 etc.) • Depending on your printer, a few characters may not print correctly. The paper may also not feed the expected amount. • Since it is not possible to check the operation of every printer on the market, some problem may arise with your printer if it does not emulate the namedprinter exactly. • When a Brother dot-matrix printer is used, make sure that the emulation is set to the IBM mode. For example, the XL500 has two emulation modes (IBM and EPSON), although only the default setting is shown on the above table. If the printer happens to be in EPSON mode, be sure to reset it to the IBM mode before printing. • Brother 9 pin mode is the default setting for M1724L/XL2000. Select the EPSON emulation mode if you want to use these printers in 24 pin mode. • With some printers, the amount of paper advance when a sheet is inserted 21