Brother International PN-5700DS Owner's Manual - English - Page 251
Dialing, Connection, Problems
View all Brother International PN-5700DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
2. Use and ,44 to select the person or company that you want to call and press . The phone number appears on the entry field of the PHONE NUMBER and you may edit it as explained above. • Pressing when the Address Book Me is displayed returns the sys- tem to the DIAL screen without selecting a number. • The selection of a phone number using the Address Book file is possible only if the file contains a column whose label starts with the string "TELEPHONE" (all capitals). For example, "TELEPHONE NO" is valid while `Telephone" or "telephone" are not. If a valid label is not found, this message will appear: ADDRESSBOOK has no telephone number column. If the Address Book file is. empty, this message will appear: ADDRESSBOOK has no data X•IMITMNIL*AWi-N Selecting the Dial Mode The dial mode that you must use depends on your telephone. Some telephones use the TONE mode, other use the PULSE mode. 1. On the DIAL screen, use 9 or EID to move the cursor to the DIAL MODE setup area. 2. Press a to select TONE or PULSE. • If you do not know whether your phone uses TONE or PULSE, try either one, and restart with the other option if the first one did not work. Dialing and Connection Problems • After the connection is established, CONNECT appears on the Terminal mode screen. If any other message appears (NO CARRIER, etc.), the line may be busy or you may have entered a wrong telephone number. Check the number and try dialing again. If OK does not appear, or if 0 (zero) appears instead, when you type AT and press DatilAtV in the terminal mode while the line is not connected, this means that the modem does not return the messages. Type ATO0VI and press t7W-001,4w. Check whether OK appears. • If the received data are not displayed correctly, check the settings (see "Setting Up" on page 239). If the baud rate of your machine and the baud rate of the host machine do not match, data cannot be displayed correctly • When you want to terminate a communication while you are connected, 237