Brother International PR-600 Users Manual - English - Page 134

Sapphire.book Page 116 Friday, August 1, 2003 9:12 AM Selecting/Editing/Saving Patterns Floppy disks (commercially available) Touch . 2 Embroidery patterns stored on floppy disks can be recalled. For details on storing a pattern, refer to "Saving Embroidery Patterns" on page 135. (If the optional floppy disk drive is installed onto models without a built-in floppy disk drive, embroidery data from a floppy disk can be opened.) Note ● Only use 2HD Windows-formatted floppy disks. Insert the floppy disk into the machine's 1 floppy disk slot. With the front of the floppy disk facing toward you, fully insert the disk into the floppy disk slot on the right side of the operation panel. X The list of patterns appears. • Normally, it will take 10 to 30 seconds for the list of patterns to appear. The more patterns on the floppy disk, the longer it will take for the list to appear. (It may even take two minutes or more.) While the data on the floppy disk is being read, do not remove the floppy disk from the slot until the patterns appear on the screen. Memo ● Folders on the floppy disk cannot be displayed. Therefore, embroidery data saved in folders cannot be opened. Select an embroidery pattern. 3 Touch the desired pattern. Note ● Only insert or remove floppy disks while appears in the display or while the embroidery machine is turned off. ● Make sure that the floppy disk is inserted facing the correct direction, do not insert the disk with extreme force, and do not insert any object other than floppy disks into the slot, otherwise the machine may be damaged. X The selected pattern appears in the pattern display area. 116 1 Shows the amount of available space on the floppy disk 2 Touch this key to delete the selected pattern.