Brother International PR-600 Users Manual - English - Page 217

Sapphire.book Page 199 Friday, August 1, 2003 9:12 AM The thread picker did not operate correctly. The thread is entangled on the thread picker, remove the thread, and then touch . was touched while no floppy disk is inserted or the floppy disk is damaged. Insert a floppy disk or use a different floppy disk. The inserted floppy disk cannot be used. Use a different floppy disk. Patterns on the floppy disk cannot be read. The floppy disk may be damaged. The pattern cannot be stored on the media. For a floppy disk: If the pattern still cannot be stored, even after the floppy disk drive is cleaned, use a different floppy disk. For a CompactFlash card: Use a different card. The pattern is being saved onto a write-protected floppy disk. Cancel the write-protection before trying to store the pattern. Patterns cannot be deleted from the floppy disk. The floppy disk may be damaged. The floppy disk cannot be formatted. Use a different floppy disk. While the pattern list screen for the floppy disk was displayed, the floppy disk was removed or changed and a pattern was selected. Insert the previous floppy disk or display the pattern list screen for the new floppy disk and select a pattern. 7 was touched while no CompactFlash card is inserted. Insert a CompactFlash card. (Refer to page 114.) The inserted CompactFlash card cannot be used. Use a different CompactFlash card. Patterns on the CompactFlash card cannot be read. The CompactFlash card may be damaged. Troubleshooting 199