Brother International PR655 Operation Manual - Page 264

APPENDIX The patterns you are editing take up too much memory, or you are editing too many patterns for the memory. Sewing cannot begin from the specified starting position. Change the starting position or rehoop the fabric and change the embroidering position. (Refer to page 123, 124.) The needle has stopped at an incorrect position. Turn the handwheel so that the mark on the handwheel is at the top. The needle bar case could not be The needle bar case has stopped at The needle bar case motor has moved to its initial position. an incorrect position. locked up. Touch to automatically Touch to automatically Touch to automatically reset the needle bar case. reset the needle bar case. reset the needle bar case. The automatic needle-threading Another operation was performed Too many patterns are being mechanism did not operate while the automatic needle- combined for the amount of correctly. threading mechanism was memory available. Remove the thread entangled in the threading the needle. Delete some patterns from the automatic needle-threading Press the automatic needle combined pattern. mechanism, and then touch threading button, and then perform . the other operation after the needle is threaded. (Refer to page 59.) 262