Brother International PT 1400 Users Manual - English - Page 52
Min 4 Digits, No Files, No Tape, Text Too High, Xx Block, Text Too Long, Value Out Of, Range, Length
UPC - 012502607359
View all Brother International PT 1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Error Message MIN 4 DIGITS! NO FILES! NO TAPE! TEXT TOO HIGH! XX BLOCK TEXT TOO LONG! TEXT TOO LONG! XX BLOCK VALUE OUT OF RANGE! Cause • This message appears if less than the minimum four digits are entered as the bar code data. • This message appears if no files are stored in the memory when you try to recall or delete one. • This message appears if no tape cassette is installed when you try to feed the tape, print or use the Preview function. • This message appears if the size of the text is larger than the width of the installed tape. • This message appears if the length of the text is longer than the label length that has been set with the Length function. • This message appears if you try to print a label that is longer than the specified block length. • This message appears if the value entered while setting the Margin, Length, and Block Length function is not within the allowable range. • This message appears if the values for the blocks to be printed is not within the allowable range. Solution • Enter a minimum of four digits before pressing n. • Store a text file before trying to recall or delete one. • Install a tape cassette and try again. • Reduce the size of the characters, install a tape with a greater width, or select the AUTO text size setting. • Press A, and then select a longer label length. • Select a longer block length. • Type in a value that is within the allowable range. 44