Brother International PT 1800 Users Manual - English and Spanish - Page 11
TAPE CASSETTE, To change the tape cassette - labeler
UPC - 012502525882
View all Brother International PT 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TAPE CASSETTE A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are available for this machine in a wide variety of colors and sizes, it is possible to make distinctive color-coded and stylized labels. In addition, this machine has been designed to allow you to change the tape cassettes quickly and easily. To change the tape cassette: 1 Lift open the tape compartment cover. The installed cassette is also released. 2 If a tape cassette is already installed, remove it by pulling it straight up. 3 If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette until there is no slack in the ribbon. Also, make sure that the end of the tape feeds under the tape guides. If you are using a new tape cassette provided with a stopper, be sure to remove the stopper. 4 Insert the tape cassette firmly into the tape compartment, making sure that the entire back of the cassette touches the bottom of the compartment. When inserting the tape cassette, make sure that the inner ribbon does not catch on the corner of the metal guide. 5 Close the compartment cover, then turn on the machine if it is off. 6 Hold down Feed and press once to advance the tape and remove any slack. 7 Push down on the tape cutter lever to cut off any excess tape. 7