Brother International PT 2110 Users Manual - English and Spanish - Page 69
Problem, Possible Cause, Recommendation, The LCD messages, are displayed in a, foreign language. - troubleshooting
UPC - 012502618805
View all Brother International PT 2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
z TROUBLESHOOTING Problem Possible Cause Recommendation The LCD messages are displayed in a foreign language. Is the language set properly? Refer to "Setting Language and Unit" on page 24 and select the desired language for the LCD messages. The label is not printed correctly. Is the tape cassette installed When installing a cassette, correctly? press firmly until it clicks into place. Is the print head clean? If not, clean the print head using a cotton swab or optional print head cleaning cassette (TZ-CL4). Is Cut Option set to Chain or No Cut? When these options are set, the tape is not fed after printing the label. Check the Cut Option setting, or hold down the key and press the key to feed and cut the tape. The ink ribbon is Is the ink ribbon in the tape If the ink ribbon is broken separated from the cassette loose, or did you replace the tape cassette. If ink roller. pull on the label coming out not, leave the tape uncut and of the tape exit slot? remove the tape cassette, then wind the loose ink ribbon onto the spool as shown in the figure. 1 2 Spool 3 4 Ink ribbon 5 6 7 8 9 63 What to do when...